17696 Exposure Head HEAD: Stroke Clock or Imaging signal fault, check LC-BP cable (OR) Stroke Clock fault (bipolar) Thermal In order to image properly, the head requires the SCLK and IMAGING signals from the MPE. These signals are in the DB9 connector (LC-BP cable) between the MPE backplane and the head. If these signals are not detected during a plot, this error will be generated. A hotlink fault can also cause this problem. If replacing the LC-BP cable doesn't clear the fault, then there may be a faulty hotlink connection. If replacing the cables doesn't solve the problem, then there is most likely a connection fault with the cabling inside the top cover of the head. Replace the LC-BP cable, and if that doesn't work, replace the hotlink cable. SCLK or IMAGING signal not received by the head. Hotlink fault. ..\..\ShowAllErrors.htmFirmware 0 Error Index ..\..\ShowAllCommands.htmFirmware 0 Command Index ..\..\ShowAllNVS.htmFirmware 0 NVS Index Updated: Wed Jul 16 19:33:42 2008 PST